Which two statements about the tunnel mode ipv6ip command are true. (Choose two.)


Which three statements about link state routing are true. (Choose three.)


Which option is the master redundancy scheme for stacked switches.


Which command is configured on a switch to enable neighbor discovery in a multivendor environment.


What is the default Syslog facility level.


Which type of MAC address is aged automatically by the switch.


Which command can you enter on a switch to display the IP addresses associated with connected devices.


What are two benefits of private IPv4 IP addresses. (Choose two.)


On which combinations are standard access lists based.


Which Layer 2 protocol encapsulation type supports synchronous and asynchronous circuits and has builtin securit ...


Which two server types are used to support DNS lookup. (Choose two.)


Which two statements correctly describe steps in the OSI data encapsulation process. (Choose two.)


Which two statements about floating static routes are true. (Choose two.)


Which two tasks does a router perform when it receives a packet that is being forwarded from one network to anot ...


Which WAN topology is most appropriate for a centrally located server farm with several satellite branches. ...


Which two statements about wireless LAN controllers are true. (Choose two.)


Which two statements about EUI 64 addressing are true. (Choose two.)


Which two statements about northbound and southbound APIs are true. (Choose two.)


Which two advantages do dynamic routing protocols provide over static routing. (Choose two.)


Which two elements are fields in an Ethernet frame. (Choose two.)


Which two elements are fields in an Ethernet frame. (Choose two.)


Which two functions can be performed by a local DNS server. (Choose two.)


Which two statements about 1000BASE T UTP cable are true. (Choose two.)


Which three statements about Syslog utilization are true. (Choose three.)


Which condition indicates that service password encryption is enabled.


Which type of access list compares source and destination IP addresses.


In which STP state does MAC address learning take place on a PortFast enabled port.


DRAG DROP Drag and drop the protocols from the left onto the correct IP traffic types on the right. Select and P ...


If all switches are configured with default values, which switch will take over when the primary root bridge exp ...


You are configuring an IP SLA ICMP Echo operation to troubleshoot a network connectivity issue. When do you ente ...


You have configured a router with an OSPF router ID, but its IP address still reflects the physical interface. W ...


Which two values must you specify to perform an ACL based Path Trace using APIC EM. (Choose two.)


Which two neighbor types are supported in a BGP environment. (Choose two.)


Which three commands can you use to set a router boot image. (Choose three.)


Which protocol does IPv6 use to discover other IPv6 nodes on the same segment.


A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS image ...


What are two requirements for an HSRP group. (Choose two.)


Which switching method checks for CRC errors.


Which two statements about stacking Cisco switches are true. (Choose two)


Which command must you enter to configure a DHCP relay.


Cisco IOS supports which QoS models.


Which two options describe benefits of aggregated chassis technology. (Choose two.)


Which two statements about IPv6 and routing protocols are true. (Choose two.)


Which technology is a critical component of a cloud based architecture.


Which two statements describe characteristics of IPv6 unicast addressing. (Choose two.)


You apply a new inbound access list to routers, blocking UDP packets to the HSRP group. Which two effects does t ...


Where does routing occur within the DoD TCP/IP reference model.


Which two approaches are common when troubleshooting network issues. (Choose two.)


Which two statements about GRE tunnels are true. (Choose two.)


Which two values must you specify to define a static route. (Choose two.)


After you deploy a new WLAN controller on your network, which two additional tasks should you consider. (Choos ...


Which two statements correctly describe RADIUS. (Choose two.)


After you configure a DHCP server on VLAN 10 to service clients on VLAN 10 and VLAN 20, clients on VLAN 10 are g ...


Which two statements about the ip subnet zero command are true. (Choose two.)


Which LLDP extension provides additional support for VoIP.


What is the first step in the NAT configuration process.


Which two statements about IPv4 multicast traffic are true. (Choose two.)


What are three characteristics of the TCP protocol. (Choose three.)


A network administrator enters the following command on a router: logging trap 3. What are three message types t ...


Which three statements about HSRP operation are true. (Choose three.)


Which interface counter can you use to diagnose a duplex mismatch problem.


Which effect of the terminal monitor command is true.


During which phase of PPPoE is PPP authentication performed.


Which two benefits of implementing a full mesh WAN topology are true. (Choose two.)


What value is primarily used to determine which port becomes the root port on each non root switch in a spannin ...


A national retail chain needs to design an IP addressing scheme to support a nationwide network. The company nee ...


Which option is a valid IPv6 address.


When troubleshooting client DNS issues, which two tasks must you perform. (Choose two.)


Which three statements describe the reasons large OSPF networks use a hierarchical design. (Choose three.)


Which algorithm is used for the frame check sequence in an Ethernet frame.


You are implementing WAN access for an enterprise network while running applications that require a fully meshed ...


Which two best practices protect your network from VLAN hopping attacks. (Choose two.)


Which two commands can you use to configure an LACP EtherChannel. (Choose two.)


Which two facts about configuring EIGRPv6 are true. (Choose two.)


Which two statements about RFC 1918 addresses are true. (Choose two.)


Which file system management command is used frequently when IOS backups, upgrades, and restores are performed. ...


Which feature can cause a port to shut down immediately after a switch reboot.


Which two statements about link state routing protocols are true. (Choose two.)


Which protocol speeds up the MAC aging process.


Which two statements about the ip default network command are true. (Choose two.)


Which two statements about PAP authentication in a PPP environment are true. (Choose two.)


Which chassis aggregation technology combines two physical switches into one virtual switch.


Which command should you enter to configure a single port to bypass the spanning tree Forward and Delay timers. ...


Which two conditions can be used to elect the spanning tree root bridge. (Choose two.)


Which extended ping feature do you use to specify the path that the packet traverses.


Which two statements about IGP and EGP routing protocols are true. (Choose two.)


What are two benefits that the UDP protocol provide for application traffic. (Choose two.)


What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast. (Choose two.) ...


Which two goals are reasons to implement private IPv4 addressing on your network. (Choose two.)


Which two tasks should you perform to begin troubleshooting a network problem. (Choose two.)


Which frame type allows STP to compute the spanning tree topology.


Which command should you enter to configure a device as an NTP server.


Which keyboard shortcut can you use to exit the System Configuration Dialog on a Cisco networking device and ret ...


Which two pieces of information can you learn by viewing the routing table. (Choose two.)


Which two circumstances can prevent two routers from establishing an EIGRP neighbor adjacency. (Choose two.) ...


Which QoS feature can drop traffic that exceeds the committed access rate.


Which two statements about RIPv2 are true. (Choose two.)


Which two statements about the successor and feasible successor are true. (Choose two.)


Which value is used to build the CAM table.


Which two statements about TACACS+ are true. (Choose two.)


Which two commands can you enter to configure an interface to actively negotiate an EtherChannel. (Choose two. ...


Which two statements about PDU encapsulation are true. (Choose two.)


Which two commands should you enter to view the PID and serial number of a router. (Choose two.)


Which Rapid PVST+ port role provides a different path to the root bridge.


Which two cable specifications can support 1 Gbps Ethernet. (Choose two.)


Which two statements about static routing are true. (Choose two.)


What is the easiest way to verify the Layer 3 path from a router to host 192.168.2.1.


What is a valid HSRP virtual MAC address.


What is the minimum Ethernet frame size.


Which two statements about UTP cables are true. (Choose two.)


Which adverse circumstance can occur when you connect full duplex devices to a shared Ethernet hub.


What is the simplest IP SLA operation that can measure end to end response time between devices.


Which two commands should you enter to prevent a Cisco device from sharing information with upstream devices. ...


What is the maximum number of switches that StackWise can support in one stack.


Which command should you enter to configure a single port to prevent alternate ports from becoming designated po ...


What are two features of IPv6. (Choose two.)


Which two facts must you take into account when you deploy PPPoE. (Choose two.)


Which two statements about an Ethernet frame source address are true. (Choose two.)


Which two benefits are provided by cloud resources to an enterprise network. (Choose two.)


Which two pieces of information can you determine from the output of the show ntp status command. (Choose two. ...


Which feature or method can you use to isolate physical layer problems on a serial link.


After an FTP session to ftp.cisco.com fails, you attempt to ping the server. A ping to ftp.cisco.com also fails, ...


Which access layer threat mitigation technique provides security by acting as a filter between trusted and untru ...


Which circumstances is a common cause of late collisions.


Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue. ...


Which command allows you to set the administrative distance for EIGRP for IPv6.


Which value is included in the initial TCP SYN message.


Which two address spaces are valid Class B IPv4 ranges that are non routable to the Internet. (Choose two.) ...


Which IP address can send traffic to all hosts on network 10.101.0.0/16.


Which two technologies can combine multiple physical switches into one logical switch. (Choose two.)


Which command should you enter to verify the priority of a router in an HSRP group.


Which two actions must you take to correctly configure PPPoE on a client. (Choose two.)


Which two features are compatible with port security. (Choose two.)


Which plane handles switching traffic through a Cisco router.


Which two statements correctly describe the ping utility. (Choose two.)


Which two commands can you use to configure a PAgP EtherChannel. (Choose two.)


Which command must you enter to configure a DHCP client.


Refer to the topology below and answer the following question. Why did Branch1 router lose WAN connectivity wit ...